|
|
| Step
1: |
Open your Web Browser.
|
| Step
2: |
Type 'http://192.168.1.1'
into the address field. Click the 'Go' button. |
| Step
3: |
You should then
see an "Enter Network Password" window. Enter your User
Name and Password, then click 'OK'. |
| Step
4: |
Change the 'Domain
Name' setting (outlined in the graphic below) to read 'attbi.com'.
Also make sure the 'Get an IP Address Automatically' radio button
is selected.
 |
| Step
5: |
Make sure all three
'Domain Name Servers' are set to 0.0.0.0 |
| Step
6: |
Click the 'Apply'
button at the bottom of the NBG600's Access Setup Page. |
| Step
7: |
Power-cycle ALL
the devices (Cable modem, NBG600, PCs) connected to the router. |
| Step
8: |
Congratulations,
you now have changed your configuration to accomodate the new changes. |
If you still
cannot connect to the Internet, please click here.
|