| Problem: My SOHOware PCMCIA Ethernet Adapter will
not install properly. The driver shows a yellow exclamation mark next to it under
"Device Manager." Solution: This problem may have various causes. To
begin troubleshooting, look under Device Manager (Control Panel > System) and check
under the "Network Adapters" category to see if there is more than one instance
of the ND5100 driver. If you see a driver labeled "NDIS" or "ODI,"
remove it as well as all drivers that are labeled "NDC ND5100". When prompted to
reboot your computer, select "No". Check to see if there is a category labeled
"Other Devices". If there is, look inside this category and remove any driver
labeled "NDC Ethernet" or "NDC Credit Card Adapter". Before rebooting,
remove the card from your PCMCIA socket. After the computer has booted up again, insert
the card into the PCMCIA socket and begin the installation process again, according to the
instruction manual. |
